-
Cordierite Cylindrical Fan-shaped Honeycomb Ceramic Regenerator for Ladle and Intermediate Ladle Baking Device
Honeycomb ceramic regeneration have significant advantages such as high temperature resistance, corrosion resistance, good thermal shock stability, high strength, large heat storage capacity, and good thermal conductivity, greatly increasing their effectiveness and service life.
-
Heat Storage & Thermal Storage Alumina Ceramic Balls for Industrial Furnaces
Heat storage ceramic ball is made of industrial alumina and refractory kaolin as the main raw materials. It is scientifically formulated, shaped and calcined at high temperature.
-
Fish Tank Aquarium Water Filter Media Hexagonal Bio Glass Ceramic Ring for Water Treatment
The filter quartz ceramic ring is made of natural silicate raw materials and sintered at high temperature, with stable chemical properties.
-
Thermal Storage RTO RCO Ceramic Honeycomb For Heat Recovery
High Temperature Air Combustion (HTAC) is new-type combustion technology with great energy-saving and environment protection. This technology is to make two regenerator to absorb heat and send out heat alternatively through the reversal valve, recuperate the heat of the exhaust gas to the maximum extent, then heat the combustion-supporting air and coal gas to over 1000°C, even the inferior fuel of lower calorific power can also catch fire steadily and burns high-efficiently. The heat storage honeycomb ceramic as heat exchange media is the key part of HTAC.
-
Plastic Polypropylene Tri packs for scrubber media
Tri-Packs tower packing provides maximum surface contact between the gas and the scrubbing liquid by facilitating continuous formation of droplets throughout the packed bed. This results in high scrubbing efficiency, and minimizes total packing depth required.
-
Desulfurization Tower Plastic Vane Pack Demister S Shape and C Shape
Vane type demister/mist eliminator also known as baffled type mist eliminator/demister is a high capacity inertial separator. Vane mist eliminators consist of closely spaced corrugated plates, which cause the mist-laden gas to change direction several times from inlet to outlet, that force entrained liquid droplets to impinge on the vane surfaces where they form a liquid film and drain. Useable in either vertical (upward) or horizontal flow designs.
-
Waterproof Air Filters 100x100x100mm Honeycomb Activated Carbon Cube for Vocs Treatment
Honeycomb activated carbon is made from coal based activated carbon as raw material, pressed by a bee mold, and activated and fired at high temperature. Honeycomb activated carbon has the characteristics of large specific surface area, low through-hole resistance, developed micropores, high adsorption capacity, and long service life, and is widely used in air pollution control. The honeycomb activated carbon adsorption method is used, which means that the pollutants in the exhaust gas are adsorbed when the exhaust gas comes into contact with porous activated carbon with a large surface, thereby playing a purification role.
-
MBBR Filter Media for waste water treatment
MBBR biofilm carrier is a new biological suspension carrier which modified polymetric material with the promoted addition of bio enzyme,adaptable for all kinds of microoganism to grow and reproduction rapidly to dissolve organics in the water.
-
Aquarium Fish Tank Filter Media Bacteria House Nano Plum Ring Quartz Ceramic Bio Rings for Koi Pond
The nano plum ring is a hotbed for culturing nitrifying bacteria, and nitrifying bacteria live in aerobic water or sand, and play an important role in the process of oxygen circulation water purification.
-
SIC/Silicon carbide Ceramic Foam Filter for non-ferro alloy molten metal filtration
Silicon Carbide Ceramic Foam Filters mainly for filtration of cast iron and non-ferrous alloys. With their excellent resistance to attack and corrosion from molten iron liquid, they can effectively remove inclusions, reduce trapped gas from liquid metal and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit. SiC Ceramic Foam Filters is available in all standard dimensions and different thickness. The most common porosities are PPI 10, 20 and 30; higher porosities are available upon request. Custom-made cut-to-size filters are also possible.
-
4A Zeolite Molecular Sieve for Methanol removal from liquid and Removal of carbon dioxide, ammonia
Molecular Sieve type 4A is an alkali alumino silicate; it is the sodium form of the Type A crystal structure. 4A molecular sieve has an effective pore opening of about 4 angstroms (0.4nm). BESTN type 4A molecular sieve will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger. Such adsorbable molecules include simple gas molecules such as oxygen, nitrogen, carbon dioxyde and straight chain hydrocarbons. Branched chain hydrocarbons and aromatics are excluded.
-
PP PE PVC Plastic High Flow Ring 50mm 76mm for Mass Transfer
Plastic High Flow Ring has the strong structure provides high mechanical stability with high void fraction.
