-
High Purity Inert Alumina Ceramic Ball And Packing Balls
Ceramic Balls (also known as support ball, inert ball and catalyst support media) were very important component in the catalytic process in the refinery, gas processing and petrochemical industry. Its main function is to act as packing material and at the same time to support the catalyst bed in order to prevent breakthrough or loss of catalyst or adsorbent materials downstream of the reactor vessels due to the high pressure and temperature inside the reactor vessels during the operation. Ceramic ball come up with a few different sizes, which are 1/8″, 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1¼”, 1½”, 2″. The size was arranged layer by layer at the top and bottom of the vessel, with different sizes of ceramic ball.
High Alumina Ball 99% is equal Denstone 99 Support Media. It is in chemical composition99+% alpha alumina and a maximum 0.2wt% SiO2 . Because of its high alumina content and low silica (SiO2 ), it’s a very excellent and ideal product for high temperature and steam applications, such as secondary reformers in ammonia processing, where leached silica will coat downstream equipment or foul the catalyst bed.
99% High Alumina Ball has very excellent thermal properties, with its high density high-temperature resistance 1550℃, also it’s a good choice for heat retention or equilibration media.
For its superior chemical resistance, it’s suitable for applications in olefin processes, such as ethylene dryers, where there’s the polymerization problem. -
Sous Vide Ball for cooking
Thermal Insolating balls for Sous Vide
* Reduced loss of heat by up to 90%
* Increase the temperature accuracy
* Reduce evaporation and thus water loss
-
Stainless Steel 304 316L Tower Internals Metal Trough Pan Type Gas-liquid Distributor for Packing Column
The trough pan liquid distributor is usually composed of a diversion groove (also known as the main groove or primary groove) and a distribution groove (also known as the secondary groove or secondary groove Slot).
-
PVC Sheet Pile Z Sheet Piling for Water Infrastructure
The sheet piles are manufactured by extrusion as a monolithic profile or co-extruded with a core made of material obtained by recycling architectural PCV, covered with a layer of primary plastic material.
-
Three Way Catalytic Converter Metal Honeycomb Substrate with PT Pd pH for Automotive Exhaust Purification
Metal carrier three-way catalyst is the most important external purification device installed in automobile exhaust system. It can convert harmful gases such as carbon monoxide, hydrocarbons and carbon oxides discharged from automobile exhaust into harmless through oxygen compounds and reduction. of carbon dioxide, water and nitrogen.
-
Catalytic Converter Customized Wood Stove Catalytic Converter
High Temperature Air Combustion (HTAC) is new-type combustion technology with great energy-saving and environment protection. This technology is to make two regenerator to absorb heat and send out heat alternatively through the reversal valve, recuperate the heat of the exhaust gas to the maximum extent, then heat the combustion-supporting air and coal gas to over 1000°C, even the inferior fuel of lower calorific power can also catch fire steadily and burns high-efficiently. The heat storage honeycomb ceramic as heat exchange media is the key part of HTAC.
-
10-60PPI Reticulated Open Cell Foam Filters Polyurethane Aquarium Filter Sponge
Filter sponge, also known as mesh sponge or blasting sponge. The polyurethane filter sponge is made of ordinary soft open cell foam through mesh processing. The mesh processing removes the original facial mask or wall film between foam networks, and obtains the main skeleton mesh structure. The porosity of the filter sponge is as high as 97%, with excellent breathability, good softness, and high mechanical strength. ade Density Cell count Pore size Maximum Dimensions (kg/m3) (cells/cm) ... -
3-5mm Water Filter Media Far-Infrared Ceramic Ball for Drinking Water and Shower
The far-infrared ceramic ball increases the emissivity of far-infrared rays to more than 90% and achieves molecular resonance.
-
5-50mm PTFE solid ball PTFE hollow ball
PTFE Balls are well suited for industrial applications that require an inert, chemically resistant ball, with the purity, specific gravity and wide operating temperature range of PTFE (polytetrafluoroethylene) that other plastic ball materials don’t provide. These solid plastic balls are used in check valves, relief valves, float valves, and everything from carburetors to toggle switches and more. They also work well for many manufacturers as light load ball bearings.
The Properties of PTFE
PTFE * Excellent chemical resistant * Water absorption: 0 * Specific gravity: 2.13 to 2.22 * Cubic inches per lbs.: 12.6 to 13.2 * Rockwell hardness (Shore D): 50 to 65 * Maximum temperature: 550°F * Tolerance: ±0.001inch * Sold in increments of 10 only Available Materials: Virgin Grade PTFE Modified PTFE Glass filled-PTFE (5~25% Glass Fibers compounded with virgin PTFE) Other PTFE material compounds are possible upon request.
> Heat resistance
can work stably from -180℃ to +260℃.
> Excellent non-stickiness
Easier to remove resins, dopants, oils, and other sticky materials.
> Good mechanical property
No deformation, low friction coefficient.
> No poison
Physical inertia, no adverse reactions.
Normal size1/16″3/32″1/8″5/32″3/16″1/4″5/16″3/8″1/2″5/8″3/4″1″1 1/8″1 1/4″1 1/2″1 3/4″2″2 1/4″2 1/2″3″4″custom make size is available -
Square shape cordierite honeycomb ceramic accumulator
Regenerative Thermal/Catalytic Oxidizer (RTO/RCO) is used to destroy Hazardous Air Pollutants(HAPs),Volatile Organic Compounds (VOCs) and Ordours emissions etc. Which is extensively applied in the fields of Automotive paint, Chemical industry, Electronic & Electric manufacturing industry, Contact Combustion System and so on. Ceramic Honeycomb is specified as structured regenerative media of RTO/RCO.Size(mm)Numbers of HoleWall thicknesInner wallHole sizeSurface areaPorosity (%)Bulk weight (kg/ m3)150×150×30025×251.21.04.9457468666150×150×30040×400.90.73.0288465725150×150×30043×430.90.72.7693263740150×150×30050×500.80.62.38108263770150×150×30060×600.70.51.99129863784100×100×15026×260.90.73.1087565799100×100×15033×330.80.62.40108363866Product ParametersChemical & Physical IndexCordieriteDense CordieriteCordierite-MulliteMulliteCorundum-MulliteDense AluminaChemical Composition %SiO245-5535-4535-4525-3820-3240-50Al2O330-3840-5040-5050-6565-7345-55MgO10-153-133-130-10-23-5K2O+Na2O<1.0<1.0<1.0<1.0<1.03-6Thermal Expansion Coefficient (10-6/K-1)<2<4<4<5<7≤6.5Specific Heat (J/kg.K)830-900850-950850-1000900-1050900-11001000-1200Working Temperature (°C)<1300<1300<1350<1450<1500<1500Water adsorption(5)≤20≤15≤15≤20≤20≤5We also can make products as your request and actual operating condition. -
Ceramic Gas Liquid Distributor Groove-Tray Through Liquid Distributor for Rectifying Column
Ceramic liquid distributor has a rough and uneven appearance, with many pore sizes ranging from 6 to 10 millimeters. The product is bowl shaped, with ventilation holes spaced in the middle of the distributor and convection holes spaced around the ventilation holes. An overflow port is set at the upper end of the convection holes, and a flow blocking groove is set on the lower end face of the distributor at the peripheral position of the convection holes. The height of the overflow port shall not exceed one-third of the height of the convection hole.
When the liquid flow rate is high, in order to ensure uniform distribution of gas-liquid convection in the convection hole and
maintain a certain height of liquid, an overflow port is set at the upper end of the convection hole to ensure that uniform
distribution of gas-liquid convection can always be maintained in the packed tower. When the liquid distributor is placed
unevenly, a flow blocking groove is set on the lower end face of the distributor body around the convection hole to prevent liquid from flowing in the bottom surface of the distributor body.
-
Su622 Su525 Su457 Sz457 Su718 Sz402 PVC Sheet Pile for Water Control Solution
PVC sheet piles are made of rigid polyvinyl chloride with added processing-enhancing, impact-modifying materials, heat and UV stabilizers, and mineral fillers. The sheet piles are manufactured by extrusion as a monolithic profile or co-extruded with a core made of material obtained by recycling architectural PCV, covered with a layer of primary plastic material Product Name PVC sheet pile Plastic sheet pile Material PVC Width 457 mm or Customization Section depth 254 mm or Customiza...
