-
1″ 2″ 3″ Stainless Steel 304 316L Imtp Ring Metal Intalox Saddle Packing
Metal Intalox Saddle IMTP was developed by the United States Norton, between the shape of its saddle-shaped ring and between, and the advantages of both. Intalox metal structure in the saddle-shaped packing ring based on the increase of the annular tendon, to avoid overlap and ensure a certain degree of strength and rigidity out of a number of small claws, an increase of gas-liquid agitation, enhanced mass transfer, thus produce a unique performance.
Metal Intalox Saddle IMTP is referred to as domestic-shaped locks Intel fill, enjoy a high international reputation. This new type of efficient packing for the new equipment, packed tower, plate tower height lower than 35%, 30% decrease in diameter, or increase the efficiency of 10-30%, 20-60% reduction in pressure loss. Domestic wet instead of dry distillation distillation pilot study showed that 20 percent can reduce the investment. In short, the use of a new type of ring can be increased Intalox yield or low power costs and improve separation efficiency.
Metal Intalox Saddle can be a variety of materials, such as carbon steel, stainless steel 304, 304L, 410, 316, 316L, etc. to choose from.
-
304 316L Stainless Steel Vsp Ring Metal Inner Arc Ring For Tower Packing
Metallic VSP ring, also called inner arc ring, very special ring, is made of carbon steel, stainless steel, titanium alloy, aluminum alloy, copper alloy and stainless steel materials. Metallic VSP rings has reasonable geometric symmetry, which the inner arc are folded evenly along the axial direction and replaced alternated arranged. This design contributes a continuous surface for extremely high voidage and evenly distribution.
Metal VSP ring has the features of thin wall, large void ratio, high flowing, capacity, low pressure drop and good separation efficiency. So its application range is very wide, for drying, absorbing, cooling and regenerating tower in chemical metallurgic, coal gas and air separation industry.
-
25mm 50mm 38mm 76mm Heat Resistance Ceramic Pall Ring Tower Packing
Ceramic pall ring is a type of classical random packing, which is developed from the Raschig ring. Commonly, there are two layers of windows opened along its cylinder wall. Each layer has five ligules bending inward the axes of the ring, which is similar to the metallic pall ring and plastic. But the layer and quantity of ligules may different according to the height and diameter variation.
Generally, the opening area occupies 30% of the total area of the cylinder wall. This design helps vapor and liquid flow freely through these windows, making full use of the inner surface of the ring to improve the distribution of vapor and liquid. It can also improve the separating efficiency.
Ceramic pall ring has excellent acid resistance and heat resistance. It can resist to corrosion of various inorganic acids,organic acids and organic solvents except hydrofluoric acid, and can be used in high or low temperature conditions.
Consequently the application range is very wide. It can be used in the drying columns, absorbing columns, cooling towers,scrubbing towers and actifier columns in chemical industry, metallurgy industry, coal gas industry, oxygen producing industry,etc. -
SS304L 316L IMTP Ring Metal Intalox Ring for Chemical Tower Packing 25mm 40mm 50mm 76mm
Metal Intalox Saddle IMTP was developed by the United States Norton, between the shape of its saddle-shaped ring and between, and the advantages of both. Intalox metal structure in the saddle-shaped packing ring based on the increase of the annular tendon, to avoid overlap and ensure a certain degree of strength and rigidity out of a number of small claws, an increase of gas-liquid agitation, enhanced mass transfer, thus produce a unique performance.
Metal Intalox Saddle IMTP is referred to as domestic-shaped locks Intel fill, enjoy a high international reputation. This new type of efficient packing for the new equipment, packed tower, plate tower height lower than 35%, 30% decrease in diameter, or increase the efficiency of 10-30%, 20-60% reduction in pressure loss. Domestic wet instead of dry distillation distillation pilot study showed that 20 percent can reduce the investment. In short, the use of a new type of ring can be increased Intalox yield or low power costs and improve separation efficiency.
Metal Intalox Saddle can be a variety of materials, such as carbon steel, stainless steel 304, 304L, 410, 316, 316L, etc. to choose from.
-
PE75S HDPE MBBR Filter Media 25*4mm for Waste Water Treatment Equipment
MBBR biofilm carrier is a new biological suspension carrier which modified polymetric material with the promoted addition of bio enzyme,adaptable for all kinds of microoganism to grow and reproduction rapidly to dissolve organics in the water.
-
25mm 50mm 76mm PP PE PVC CPVC Plastic Cascade Ring PP CMR Ring for Tower Packing
It not only changes the traditional equal length and diameter, but also has a tapered flanging on one edge. This special structure shortens the distance that the gas passes through the wall, while reducing the resistance when the air passes through the bed and increasing the porosity.
-
Customize Euro 1-6 Metal DPF Motorcycle Catalytic Converter BMW Metal Carrier
Metal carrier three-way catalyst is the most important external purification device installed in automobile exhaust system. It can convert harmful gases such as carbon monoxide, hydrocarbons and carbon oxides discharged from automobile exhaust into harmless through oxygen compounds and reduction. of carbon dioxide, water and nitrogen.
-
Injection Plastic Hollow Ball PP Roll On Ball 25.4MM 28.8MM 35.56MM from Factory
This type ball used for
1.Roll on bottle
2.Sous vide cooking
Thermal Insolating balls for Sous Vide
* Reduced loss of heat by up to 90%
* Increase the temperature accuracy
* Reduce evaporation and thus water loss
-
EVA Washing Ball Acid Washing Ball for Denim Jeans Factory
Brand:Bestn
Material:EVASize:28mm 38mm 48mmPackage:10kgs per bag or as per your reqeust -
Stainless Steel Dixon Ring 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm
The dixon ring packing is mainly used in the laboratory and the separation process of small batch, high purity products. The pressure drop of the dixon ring packing is related to the gas velocity, the amount of liquid spraying, the weight of the material system, the surface tension, the viscosity, and the characteristic factors of the packing, as well as the pre-flooding treatment of the packing.
-
Polytetrafluoroethylene Pall Ring 20mm 25mm 38m 50mm 76mm PTFE Pall Ring
PTFE Pall ring (100% pure PTFE) is a kind of special plastic random packing designed to serve special working environment and applications. PTFE has very stable chemical performance, and hardly makes reaction with any acid and alkali. PTFE Pall ring can be used stably in the temperature of -200 to +250 centigrade thermometer.
-
10-30PPI Zirconia Ceramic Foam Filter for Casting
Zirconia foam ceramic filter is made of high-quality and high-purity zirconia, using unique formula and advanced environmental protection technology. It has a uniform three-dimensional network structure, high strength, stable texture, no slag dropping, high temperature resistance, and thermal shock resistance ect excellent performance. Suitable for purification and filtration of stainless steel, carbon steel, copper castings and other high temperature alloy solutions below 1700C. Can filter non-metal slag inclusions and slags as small as micrometers, making the surface of steel castings smoother and reducing machining losses; the filter can make the molten steel fill the cavity more uniformly, and the molten metal has a higher turbulence during pouring tendency, the turbulent flowing through the three-dimensional pore structure is finally converted into a very stable laminar flow. Laminar flow fills the cavity better, which reduces the impact corrosion of the metal solution on the casting cavity, and significantly reduces the reject rate, reduces production costs, and improves labor productivity.
