-
Thermal Storage RTO RCO Ceramic Honeycomb For Heat Recovery
High Temperature Air Combustion (HTAC) is new-type combustion technology with great energy-saving and environment protection. This technology is to make two regenerator to absorb heat and send out heat alternatively through the reversal valve, recuperate the heat of the exhaust gas to the maximum extent, then heat the combustion-supporting air and coal gas to over 1000°C, even the inferior fuel of lower calorific power can also catch fire steadily and burns high-efficiently. The heat storage honeycomb ceramic as heat exchange media is the key part of HTAC.
-
Waterproof Air Filters 100x100x100mm Honeycomb Activated Carbon Cube for Vocs Treatment
Honeycomb activated carbon is made from coal based activated carbon as raw material, pressed by a bee mold, and activated and fired at high temperature. Honeycomb activated carbon has the characteristics of large specific surface area, low through-hole resistance, developed micropores, high adsorption capacity, and long service life, and is widely used in air pollution control. The honeycomb activated carbon adsorption method is used, which means that the pollutants in the exhaust gas are adsorbed when the exhaust gas comes into contact with porous activated carbon with a large surface, thereby playing a purification role.
-
Lacunaris ceramic carrier ring with 7 holes as Catalyst
The ceramic carrier have stable chemical features and a low rate of water absorption, resist high temperatures and high pressure, and also resist the corrosion of acid, alkali and some other organic solvents. They can stand the change in temperature during the manufacturing process.
-
Metal Exhaust Catalyst Universal Ceramic Honeycomb Catalytic Converter for BMW E63 Q7 Audi Car Exhaust System
Metal three-way catalyst is the most important external purification device installed in automobile exhaust system. It can convert harmful gases such as carbon monoxide, hydrocarbons and carbon oxides discharged from automobile exhaust into harmless through oxygen compounds and reduction. of carbon dioxide, water and nitrogen.
-
Coating Standard Euro V Euro VI Sic DPF Diesel Particulate Filter for Truck
Customize Sic DPF & Silicon Carbide Diesel Particulate Filter for Catalytic Converter
Diesel particulate filter is mainly used in the diesel engine tail gas purifying system to solve the air pollution problem. It
adopts structure of honeycomb, and sets up independent opening and blocking up passages in both ends and the waste gas enters from one open end, then goes through the porous beehive wall, and finally discharges from adjoining passage. The carbon particulates are left over on passage wall because they are too big to pass through wall hole and won’t be discharged to air.Diesel particulate filter can effectively remove black smoke (PM e.g.: Hydrocarbons, soot) from diesel engine exhaust emission,usually DPF removes 90% or more of the soot. -
Good Heat Resistance Temperature and Thermal Conductivity Silicon Carbide Diesel Particulate Filter with Metal Shell
Customize Sic DPF & Silicon Carbide Diesel Particulate Filter for Catalytic Converter
Diesel particulate filter is mainly used in the diesel engine tail gas purifying system to solve the air pollution problem. It
adopts structure of honeycomb, and sets up independent opening and blocking up passages in both ends and the waste gas enters from one open end, then goes through the porous beehive wall, and finally discharges from adjoining passage. The carbon particulates are left over on passage wall because they are too big to pass through wall hole and won’t be discharged to air.Diesel particulate filter can effectively remove black smoke (PM e.g.: Hydrocarbons, soot) from diesel engine exhaust emission,usually DPF removes 90% or more of the soot. -
Hexagonal Honeycomb Ceramic Wood Stove Catalytic Converter with Stainless Steel Shell for Fireplace Flue
Wooden stove converter generally use mullite honeycomb ceramics and stainless steel material as the shell. Due to its good heat resistance and high temperature resistance, it can be used for wooden stove and fireplaces. The honeycomb shaped pore size can filter some impurities and can be used for smoke exhaust port filtration. If it is necessary to reduce CO emissions, coatings can be customized according to the application environment – palladium (Pd), platinum (Pt), rhodium (Rh) ratio, it can lock the heat and reduce consumption.
-
Honeycomb Ceramic Plate for casting and gas filter
Honeycomb ceramic filter apply to metal liquid filtration, it is made by material of mullite or cordierite ceramics. With unique high-density straight-pore honeycomb structure, excellent thermal shock resistance, high strength, high porosity and specific surface area. Thereby to improve its adsorption and capturing tiny impurities ability, as to get rid of non-metal impurity and gas, purify metal liquid, make the metal liquid steady and reduce the vortex. It not only reduces the defective index of the casting, prolong the working life of the casting and reduce the casting cost, but also improve mechanic capability and appearance quality of the casting.
Ceramic honeycomb filter is extensively applied to the metallurgic plants of casting and foundry, such as steel, iron, copper and aluminum, etc. It has high mechanical intensity and heat-resistance, removing the metal impurity, refractory scrap, solid refractory alloy and sinter in the molten metal liquid.
-
Infrared Honeycomb Ceramic Plate for burning
Infrared Honeycomb Ceramic Plate, It’s widely used in gas radiant heaters and plays the most important part in those applications. The interlaced corrugated surface of the ceramic tile combined with honeycomb design basis provides a superb surface area and working burning surface. We have also adopted the best raw material and new formula to maximize the micro-porosity of the tile. With all these advantages, the oxygen mix completely with the gas, burning without flame, emitting high efficiency far infrared ray and radiant heat, saving up to 40%-50% energy cost .
