China 13x HP molecular sieve 0.4-0.8mm 1.6-2.5mm for PSA oxygen generator manufacturers and suppliers

13x HP molecular sieve 0.4-0.8mm 1.6-2.5mm for PSA oxygen generator

Short Description:

Molecular Sieve 13X HP is equal to molecular sieve jlox-501. Lithium based molecular sieve is equal to molecular sieve jlox-101.

Send email to us

Product Detail

Product Tags

Description

BESTN oxygen enrichment molecular sieve series are special used in PSA/VPSA system. They have good N2/O2 selectivity, good crush strength and low loss on attrition, which is cost-effective for concentrating oxygen from air. They are widely used in industrial/Medical oxygen concentrator in ozone production filed, Aquaculture field for fish farming,Waste water treatment field, medical oxygen market. etc. Their concentating purity up to 93%+-3%, having good reputation in market. BESTN Molecular Sieve 13X HP is equal to molecular sieve jlox-501. Lithium based molecular sieve is equal to molecular sieve jlox-101.

Chemical Composition

Model	13X HP Molecular Sieve		Lithium Based Molecular Sieve
Diameter	0.4-0.8MM	1.6-2.5MM	0.4-0.8MM	1.3-1.7MM
Bulk density	≥0.62g/mL	≥0.62g/mL	≥0.63g/mL	≥0.63g/mL
Crushing strength	/	≥25N/piece		≥15N/piece
Static N2 Adsorption (1bar, 25°C)	≥8mL/g	≥8mL/g	≥22.5mL/g	≥22.5mL/g
N2/O2 Separation (1bar, 25°C)	≥3	≥3	≥6.2	≥6.2
Attrition	≤0.3wt.%	≤0.3wt.%	≤1wt.%	≤1wt.%
Moisture Content	≤0.5wt.%	≤0.5wt.%	≤0.5wt.%	≤0.5wt.%
Application	Medical care oxygen generator, small, portable oxygen concentrators Capacity: 1L/min-10L/min	Industrial and Medical Oxygen Generator/Plant, hospital oxygen concentrators of PSA system Capacity: <300Nm3/hour	Medical care oxygen generator, small, portable oxygen concentrators Capacity: 1L/min-10L/min	Industrial and Medical Oxygen Generator/Plant, hospital oxygen concentrators of PSA system Capacity: 300-10000Nm3/hour
Purity	93%±3%	93%±3%	93%±3%	93%±3%

Application

0.4-0.8mm:

Medical care oxygen generator, small, portable oxygen concentrators Capacity: 1L/min-10L/min

1.6-2.5mm:

Industrial and Medical Oxygen Generator/Plant, hospital oxygen concentrators of PSA system Capacity: <300Nm3/hour

Regeneration

This molecular sieve can be regenerated by either heating in the case of thermal swing process or by lowering the pressure in the case of pressure swing process. Put the molecular sieve in a vacuum muffle furnace for 1 hour at 550℃.

Attention

Hand & Storage Recommendation:
It should be handled to avoid generation of dusty conditions at the workplace. Storage in a dry warehouse is recommended. Open packages should be resealed to prevent contamination and adsorption of water or other gases and vapors. The material in bag-in-box should be used within 12 months,while bag-in-steel drum should be used within 24 months.

Previous: 13X Zeolite Molecular Sieve for PSA Oxygen Generator

Next: 93% alumina Activated alumina Used For Catalyst Carrier In Chemical

13X HP molecular sieve